truck loading unloading conveyor

Get Latest Price

Min. Order:: 1 Set/Sets

Min. Order:: 1 Set/Sets

Transportation:: Ocean, Land

Port:: Shanghai

Quantity:

Your message must be between 20 to 2000 characters

Contact Now

Basic Info

Supply Ability:	500 Set/Sets per Month
Payment Type:	T/T
Transportation:	Ocean,Land
Port:	Shanghai,,

Product Description

Because the belt is only a bearing surface, the operation of chain drive conveyors does not require high tension, thus greatly increasing the life of the conveyor belt and belt joints. The chain drive design does not require a bead on the outer edge of the belt to prevent belt misalignment. The Keke turning machine belt adopts steel buckle connection instead of vulcanization connection. The steel buckle connection can quickly replace the belt, and professional maintenance personnel can replace a belt within 20 minutes.
In contrast, friction-driven belt conveyors require precise tension control and adjustment to operate, and small changes in conditions can immediately affect their function. On friction drives, keeping the belt running efficiently requires high belt tension, which is transmitted to the belt joint, reducing belt life and increasing maintenance requirements. Also on friction drives, the end roll components (shafts, bearings, pulleys) are subject to higher stress levels due to the required belt tension, again reducing the life expectancy of these components

Main Features

1.Adjustable：you can adjust buttons according to your own requirements to control the length of the conveyor. If the machine is equipped with a lifting device, you can also control its end height at any time. It can finish loading and unloading by pulling the goods just beside operating personnel. You can load the goods if the belt turning forward and unload goods if the belt turning reversely. Its handling efficiency can reach 30 pieces per minute.

2.Reduce cost: it greatly shortens the distance of carrying materials by labor. It reduces the lay time , labor intensity and the damage to goods so that you can reduce handling cost and improve work efficiency.

3.Flow operation：it can load and unload the goods stably and continuously to avoid messy phenomenon and ground operation all around.

4.Safety operation: It reduces the accidents caused by extensive fatigue of unloading and unloading goods by labor.

Certifications