PVC Material Pipe Profile Conical Twin Screw Extruder
-
$22000.001-2 Set/Sets
-
$21000.003-4 Set/Sets
-
$20000.00≥5 Set/Sets
- Transportation:
- Ocean, Land
- Port:
- shanghai seaport
Quantity:
Your message must be between 20 to 2000 characters
Contact NowBasic Info
Basic Info
| Supply Ability: | 15 Set/Sets per Quarter |
|---|---|
| Payment Type: | L/C,T/T |
| Transportation: | Ocean,Land |
| Port: | shanghai seaport |
Product Description
Product Description
PVC Material Pipe Profile Conical Twin Screw Extruder
Product:Concial Twin Screw Extruder,Pvc Powder Extruder,Pvc Extruder For Sheet
Product Description
conical twin screw extruder with PVC powder raw material for pipe profile
The PVC profile extrusion line is mainly used in the area of PVC plastics, WPC profile, decorative profile etc. The unit is
composed of conical twin-screw extruder, vacuum shaping table, haul-off machine, cutter, turning-up flame. According to the different profile's section and moulds, you can choose different specifications of extruders to fit. The vacuum shaping table adopts special eddy current system to enhance cooling effect. The unique control skills of horizontal tilt and three dimension regulations embody perfectly for convenient operation. According to the different moulds and shaping tables, you can select corresponding sizing tables to meet the requirement of high output.The tractor uses the unique fluctuation technology and back pressure control with caterpillars around it. The cutter's move speed keeps with the tractor. It can automatically cut for fixed length and it also equipped with powder recycle device.The line can be used to produce PVC door and window profile,door pocket,pvc cable channel, pvc wiring duct, skirting board, louver blade etc.
Feature:
1. The barrel is heated by aluminum casting hot wire ring and cooled by air cooling system, and the heat transfer is fast and uniform.
2. Different screws can be selected according to different formulas in order to achieve the best plasticizing effect.
3. The gear box & distribution box both adopt famous bearing, imported oil seal; gear wheel adopts high-quality alloy steel under nitrogen process
4. Special design of reducer and distribution box, reinforced thrust bearing, high transmission torque and long service life
5. The vacuum calibration table adopts a special enlarged swirl cooling system, which is convenient for cooling setting, and the special horizontal tilt control has a unique three-position adjustment control, which makes the operation simple and better
reflected
6. The haul-off machine adopts unique lifting technology, upper and lower crawler is controlled by back pressure, work stably,large reliability & traction force, can automatically fixed the length cutting, and is equipped with the dust recovery device
7. All the imported components are adopted to ensure the stability and reliability of the machine under continuous operation for a long time
composed of conical twin-screw extruder, vacuum shaping table, haul-off machine, cutter, turning-up flame. According to the different profile's section and moulds, you can choose different specifications of extruders to fit. The vacuum shaping table adopts special eddy current system to enhance cooling effect. The unique control skills of horizontal tilt and three dimension regulations embody perfectly for convenient operation. According to the different moulds and shaping tables, you can select corresponding sizing tables to meet the requirement of high output.The tractor uses the unique fluctuation technology and back pressure control with caterpillars around it. The cutter's move speed keeps with the tractor. It can automatically cut for fixed length and it also equipped with powder recycle device.The line can be used to produce PVC door and window profile,door pocket,pvc cable channel, pvc wiring duct, skirting board, louver blade etc.
Feature:
1. The barrel is heated by aluminum casting hot wire ring and cooled by air cooling system, and the heat transfer is fast and uniform.
2. Different screws can be selected according to different formulas in order to achieve the best plasticizing effect.
3. The gear box & distribution box both adopt famous bearing, imported oil seal; gear wheel adopts high-quality alloy steel under nitrogen process
4. Special design of reducer and distribution box, reinforced thrust bearing, high transmission torque and long service life
5. The vacuum calibration table adopts a special enlarged swirl cooling system, which is convenient for cooling setting, and the special horizontal tilt control has a unique three-position adjustment control, which makes the operation simple and better
reflected
6. The haul-off machine adopts unique lifting technology, upper and lower crawler is controlled by back pressure, work stably,large reliability & traction force, can automatically fixed the length cutting, and is equipped with the dust recovery device
7. All the imported components are adopted to ensure the stability and reliability of the machine under continuous operation for a long time
PVC ceiling panel features
1.PVC ceiling panel are the ideal way to deliver tempered air from preheated hallways to farrowing or nursery rooms. The hollow profile acts as an air plenum delivering the air through precisely sized and positioned holes. The air enters the room uniformly without creating drafts.
2.it is light in weight, moisture resistant and reduces condensation and subsequent dripping from ceiling onto work surfaces. The cleanable, non-absorbent surface is UV stable and will not discolour.
3. solves the problem of dirty, unhygienic ceilings that are difficult, and expensive to clean by providing a bright, durable and hygienic surface, which is easily maintained. This extremely practical ceiling system is suitable for any area requiring a fixed, non-porous, non-fibrous and non-absorbent ceiling.
4.PVC ceilicing panel has various advantage over other materials namely they are waterproof, Termite Proof, Fire Retardant,Economical, Maintenance free, being non-porous and non-absorbent, can incorporate flush fitting lighting, access hatches, air vents and sprinklers easy to install & available in various colours shades & no hassles of Painting & Polishing.
2.it is light in weight, moisture resistant and reduces condensation and subsequent dripping from ceiling onto work surfaces. The cleanable, non-absorbent surface is UV stable and will not discolour.
3. solves the problem of dirty, unhygienic ceilings that are difficult, and expensive to clean by providing a bright, durable and hygienic surface, which is easily maintained. This extremely practical ceiling system is suitable for any area requiring a fixed, non-porous, non-fibrous and non-absorbent ceiling.
4.PVC ceilicing panel has various advantage over other materials namely they are waterproof, Termite Proof, Fire Retardant,Economical, Maintenance free, being non-porous and non-absorbent, can incorporate flush fitting lighting, access hatches, air vents and sprinklers easy to install & available in various colours shades & no hassles of Painting & Polishing.
Specification
Machine list of conical twin screw extruder with PVC powder raw material for pipe profile
|
Item
|
Machine name
|
Quantity
|
|
1
|
Auto feeder
|
1 set
|
|
2
|
SJSZ65/132 extruder or other model
|
1 set
|
|
3
|
die head and mold
|
1 set
|
|
4
|
calibrating machine
|
1 set
|
|
5
|
hual off machine
|
1 set
|
|
6
|
cutting machine
|
1 set
|
|
7
|
product stacker
|
1 set
|
|
8
|
electric control cabinet
|
1 set
|
Related Keywords
Related Keywords
You May Also Like
You May Also Like
-
CE standard industrial plastic shredder machine
Sevenstars Single Screw Extruder
Counter Rotating Parallel Twin Screw PVC Profile Extruder
Related ProductsProduct Categories-
pipe wrapping machine(12)
-
Counter rotating parallel twin screw extruder(4)
-
Single screw extruder(14)
-
PVC pipe extrusion machine(31)
-
PE/PP-R/PERT Pipe Extrusion Machine(19)
-
PP/PE/PVC wall corrugated pipe extrusion machine(37)
-
PC Hollow Solid Sheet Production Line(20)
-
PP PE Hollow Sheet Production Line(20)
-
SPC Sheet And Profiles Production Line(20)
-
PET/PP Packing Strap Production Line(20)
-
PP PE WPC Series Profile Extrusion Line(20)
-
PVC Ceiling Panel Production Line(21)
-
PVC corrugated roof tile extrusion line(20)
-
PVC/WPC wood plastic compound door board extrusion(24)
-
PVC foam board production line(36)
-
WPC/PVC profile extrusion machine(21)
-
Hot and cooling mixer unit(20)
-
Ungrouped(20)
-
Plastic Recycling Machine(60)
-
Plastic Granulator(83)
-
Plastic Pipe Making Machine(61)
-
Plastic Profile Extrusion Machine(21)
-
Plastic Board Sheet Extrusion Machine(11)
-
Plastic Shredder(23)
-
Plastic Auxiliary Machinery(90)
