New Rear Oxygen Sensor 11787589475 For BM-W
-
USD2530-199 Piece/Pieces
-
USD24200-499 Piece/Pieces
-
USD22≥500 Piece/Pieces
- Payment Type:
- T/T
- Incoterm:
- FOB, CFR, CIF, EXW
- Min. Order:
- 30 Piece/Pieces
- Min. Order:
- 30 Piece/Pieces
- Delivery Time:
- 10 Days
- Transportation:
- Ocean, Land, Air
- Port:
- Shanghai, Ningbo
Quantity:
Your message must be between 20 to 2000 characters
Contact NowBasic Info
Basic Info
| Place of Origin: | China |
|---|---|
| Productivity: | 200000 |
| Supply Ability: | 20000 |
| Payment Type: | T/T |
| Incoterm: | FOB,CFR,CIF,EXW |
| Certificate: | CE |
| Transportation: | Ocean,Land,Air |
| Port: | Shanghai,Ningbo |
Product Description
Product Description
New Rear Oxygen Sensor 11787589475 For BM-W 135i 335i 740i 435i 535i X3 234-4479
* Constructed with corrosion-resistant stainless steel with aluminum-oxide trap layer
* Boosts sensor response using refined zirconia element
* Utilizes PTFE filter to protect casing against water and engine contaminants
* Has undergone stringent evaluation processes to ensure dependable performance and passenger safety
* Boosts sensor response using refined zirconia element
* Utilizes PTFE filter to protect casing against water and engine contaminants
* Has undergone stringent evaluation processes to ensure dependable performance and passenger safety
Specification
|
Part Number
|
234-4479/11787589475
|
|
2 Sensor Configuration
|
Direct Fit
|
|
Position
|
Downstream
|
|
Sensor Type
|
Heated
|
|
Connector Gender
|
Male
|
|
Wires Quantity
|
4Wire Leads
|
|
Installation Type
|
Screw
|
|
Wire Harness Length
|
58.7cm
|
How to install the oxygen sensor
disassembly sequence
1: Remove the oxygen sensor connector plug
2-1: Connect the ratchet wrench to the special sleeve for the oxygen sensor
3.Drive the vehicle onto the lift, turn off the engine and raise the vehicle.
4. Find and determine the position of the front oxygen sensor.
disassembly sequence
1: Remove the oxygen sensor connector plug
2-1: Connect the ratchet wrench to the special sleeve for the oxygen sensor
3.Drive the vehicle onto the lift, turn off the engine and raise the vehicle.
4. Find and determine the position of the front oxygen sensor.
5. Remove the protective cover of oxygen sensor plug and pull out the plug of front oxygen sensor.
6. Directly screw off the front oxygen sensor to be replaced with a wrench
6. Directly screw off the front oxygen sensor to be replaced with a wrench
7. Install the new front oxygen sensor according to the original position.
8. Connect the computer to eliminate the fault code, and select to read the engine data stream to check whether the values are normal.
8. Connect the computer to eliminate the fault code, and select to read the engine data stream to check whether the values are normal.
Shipping: DHL, TNT, UPS, Fedex
1pcs in one bubble bag, 300 pieces in one carton.
Company Profile
ARL is a professional supplier for Floor jacks since 2003, our factory is located in Zhejiang Jiaxing. The company is mainly engaged in processing and sales of Hydraulic Jack, oxygen sensor and other related automobile products. Dedicate to offer best services to our customer. Welcome friends from all walks of life come to visit, guidance and business negotiation.
FAQ
1. Are you factory or trading company?
We are factory.
2. Can you make our design and put our logo on the products?
Yes, we can make your own design and put your logo on the products.
3.Can you mix the container with other supplier?
Yes, we can send our products to your other suppliers' factory or your other suppliers can send goods to our factory to load the container.
4.About MOQ ?
It depends on the items.
5. About delivery time .
Usually 7-10 days. Also depends on the item quantity and type.
6. About FOB port.
For we are close to Shanghai,our price is FOB Shanghai.
Until now we have got CE ,ANSI, UL and Australian certificate for our products.
7. How long can we get the replies?
We surely will reply to you in less than 24 hours if you have any questions.
We are factory.
2. Can you make our design and put our logo on the products?
Yes, we can make your own design and put your logo on the products.
3.Can you mix the container with other supplier?
Yes, we can send our products to your other suppliers' factory or your other suppliers can send goods to our factory to load the container.
4.About MOQ ?
It depends on the items.
5. About delivery time .
Usually 7-10 days. Also depends on the item quantity and type.
6. About FOB port.
For we are close to Shanghai,our price is FOB Shanghai.
Until now we have got CE ,ANSI, UL and Australian certificate for our products.
7. How long can we get the replies?
We surely will reply to you in less than 24 hours if you have any questions.
Contact Us
Related Keywords
Related Keywords
You May Also Like
You May Also Like
-
air in car radiator
High quality 12V 24V 100A Battery Switch for RV Marine
High quality 32V 350A Selector Switch 4 Position Manual Battery Master Switch With AFD Function
Hot sale 12V 24V Automotive Car Top Post Battery Terminals Wire Cable Clamp Terminal Connectors Car accessories
Hot sale 350A 32V ON/OFF Combine Battery Switch 5511e e-series Blue Sea Switch Systems Dual Circuit Plus Switch
Related ProductsProduct Categories
