Moisture reactive pu adhesive
- Min. Order:
- 1000 Kilogram
- Min. Order:
- 1000 Kilogram
- Transportation:
- Ocean, Land
- Port:
- Shanghai
Your message must be between 20 to 2000 characters
Contact Now| Place of Origin: | China |
|---|---|
| Productivity: | 260000tons/month |
| Supply Ability: | 250000 tons/year |
| Payment Type: | L/C,T/T |
| Incoterm: | FOB,CIF |
| Transportation: | Ocean,Land |
| Port: | Shanghai |
XCUR-M5050N
Moisture-reactive polyurethane hot melt adhesive for textile bonding
Moisture Curing Pu Adhesive
I. Product description:
XCUR-M5050N is one-component, moisture-reactive polyurethane hot melt adhesive. It can be used for compounding nylon fabric with TPU film.
Reactive Polyurethane Glue
II. Product specification:
|
|
Specification
|
|
Solid content(％)
|
100
|
|
Viscosity（Ps/90℃）
|
5000±2000
|
|
Appearance
|
Transparent paste
|
III. Characterristic and application:
1.Characteristic: Long operation time for resin, low operation temperature, strong initial adhesive force, fast curing speed, soft handle after curing , high peeling strength, Washable, and will also have high strength and high toughness effect.
2. Application: It can be widely used in garment fabrics, medical supplies - surgical gowns, industrial fabrics and so on.
Pu Glue For Textile
IV. Viscosity curve
V. Processing advice
1. Processing temperature: 80~100℃;
2. Processing humidity: 50~70%, if you need to speed up the curing speed, you can increase the ambient humidity properly;
3. Curing environment temperature: 25~35℃;
4. Since PUR hot melt adhesive is a moisture curing type polyurethane resin, so it must be stored in a sealed bag, if exposed to moisture, the surface cures to form rubber and the viscosity increases dramatically;
5. After opening the bag, it is recommended to use it as soon as possible, but it should not be exposed to the air for a long time;
6. Shelf life：6 months.
VI. Cleaning
1. Use waste cloth to wipe nozzle or barrel to remove excess PUR hot melt adhesive;
2. Add special PUR detergent to mix with unreacted PUR hot melt adhesive for 5~10 minutes.
VII. Precautions for use
1. When using, personnel should take good protective equipment to avoid high temperature scald;
2. The product contains a small amount of isocyanate, in order to avoid prolonged exposure to allergy symptoms, please use in a well-ventilated environment.
Related Keywords
