16-75mm PE/HDPE pipe production line

Pipe diameter range(mm):16-20-25-32-40-50-63-75mm

Extruder Motor power(kw):55kw

Output(kg/h):100-180kg/h

Total length(m):35m

Wall thickness: by required 

PE/HDPE pipe production line photos

Extruder of PE/HDPE pipe production line

SJ65/33 PE/HDPE PIPE EXTRUDER MAIN TECHNICAL PARAMETERS

1. Single screw extruder: model sj65 / 33 PE pipe making machine
2. Cylinder and screw material: 38CrMoAlA, after nitriding and grinding, the depth of nitriding layer is more than or equal to 0.6mm, which has sufficient strength, wear resistance and corrosion resistance;
3. Cylinder and screw structure: barrier screw, asymmetric slotted barrel design.
4. The gearbox is equipped with strong thrust bearing and high torque output; the gear is made of special alloy, with hard tooth surface and gear grinding process; high quality, high torque and high speed gearbox; low heat, low noise, long life and hard tooth surface reducer is equipped with external cooling system
5. Temperature control table of OMRON
6. ABB or Siemens brand inverter
7. Schneider or Siemens AC contactor
8.  Siemens Bede motor
9. Diameter of screw: Φ 65mm
10. Length diameter ratio of screw: 33:1
11. Driving motor power: 55kW high speed screw
12. Gearbox: high torque, low noise, hard tooth surface grinding reducer is equipped with external cooling circulation system

13. Heating power of barrel: 5 × 4.5kw (cast aluminum heating ring)
14. Cooling power : 5 × 0.25kw forced air cooling
15. The output is 100-200kg/h