single layer ctp plate amperage OEM
- Transportation:
- Ocean, Land, Air
- Port:
- ShangHai Port, Ningbo Port
Your message must be between 20 to 2000 characters
Contact Now| Place of Origin: | China |
|---|---|
| Supply Ability: | Strong |
| Payment Type: | L/C,T/T,D/P |
| Incoterm: | FOB,CFR,CIF,EXW |
| Transportation: | Ocean,Land,Air |
| Port: | ShangHai Port,Ningbo Port |
After using computer-to-plate instead of film, the printing quality of the printed matter is significantly improved because the film is not used, because the image and dots are not affected by the traditional prepress process.
of those mass decay effects. The quality of the output printing plate is better, because the influence factors such as dust and scratches on the film no longer exist, and the edges of the dots are clean, sharp and faithful.
original.
Since there is no need for plate positioning, the quality of the printing plate is better, and there is no need to re-make the plate due to inaccurate positioning, avoiding a lot of time spent on proofreading when printing on the machine. With the whole
There are more and more short-run jobs in the printing industry, and plate-changing and machine debugging have become regular tasks, reducing the printing and debugging time, which can significantly save time and cost. also reduced
Waste of water, paper, ink and other consumables needed for debugging.
|
UV-PH HIGH SENSITIVITY POSITIVE CTcP PLATE |
|
|
Plate Type |
UV-PH type UV-CTP plate, also used as high sensitivity PS plate. |
|
Application |
Commercial sheetfed and rotary press printing |
|
Substrate |
Electrochemically grained and anodized aluminum |
|
Gauge |
0.15/0.20/0.25/0.30/0.40mm |
|
Maximum width |
1320mm |
|
Spectrum scope |
350-460nm UV light, especially 400-410nm UV laser |
|
Sensitivity |
40±5 mw(Cron UV-4632CI platesetter Parameter 1000 rpm) |
|
Safe light |
UV filtered or Yellow light |
|
Coating color |
Blue-Green |
|
Dot reproduction |
2-98% @ 250 lpi |
|
Applicable platesetter |
main UV-CTP platesetters such as Cron,luscher,Amsky,basysPrint. |
|
Run length |
Above 100,000,which may vary against the different press, ink and stock condition |
|
Developer |
Common positive offset plate developer |
|
Development |
Conductivity: min 55ms, max 65ms Temperature: 20-25°C PH 13.00-13.40 |
|
Packaging |
0.15mm 100 pieces/box 0.25/0.30mm 50 pieces/box if length <1030mm; 30 pieces/box if length ≥1030mm; 25 pieces/box if the area > 1m2 |
|
Shelf life |
18 months when stored in a light-free area away from excessive cold, heat and high humidity |
|
Transport and storage |
Store plates at in their packaging, away from excessive cold, heat or high humidity. Recommended condition is: temperature 10-26°C & RH between 40 - 70%. |
Manufacturer ctcp printing plates uv ctp plate ctcp printing offset plate
Manufacturer ctcp printing plates uv ctp plate ctcp printing offset plate
Manufacturer ctcp printing plates uv ctp plate ctcp printing offset plate
Manufacturer ctcp printing plates uv ctp plate ctcp printing offset plate
Related Keywords
