Engineered floor profiling machine

Specifications Our company is a professional production of floor profiling production line manufacturer.

  Our Services    Major equipment on the following:   A.Feeding Rolling Table (front) (GTB.1):Positioning separation, multi-sheet after a separation then a subsequent transportation to the next procedure.   B. Longitudinal Double End Tenoner Machine (DTE):A pair of vertical sheet molding, five of the 10 axis preparation. Precision control for the level of bad 0.02-0.05 mm, straightness 0.05 millimeters per meter.   C. Longitudinal Brush Dust Machine (SGP01):In vertical slotted right after brushing the surface of the work piece with ash.   D. Feeding Rolling Table (central) (GTB.2):Vertical processing will be completed sheet into the next process.   E. Automatism Feeding Rack (GT):Right transportation to the plate in the precise location of a single-chip stocks after separation into the next process.   F.Electrical Control System (GT.D): The coordination of the whole production line control.   G. Transverse Double end Tenoner Machine (DTEH):The two ends of a pair of sheet molding. Precision control for the level of bad 0.05 mm, straightness 0.05 millimeters per meter, vertical degrees of 0.05 mm / 100.   H. Feed out belt conveyor:From transverse DET machine feed out boards and then convey.   I. Longitudinal Brush Dust Machine (2) (SGP02):In vertical slotted right after brushing the surface of the work piece with ash.   Feeding Rolling Table (front) 1.Length: 2400 mm   2.Width: 600 mm   3.Speed: Can Adjust, 30-80 m/min   4.Motor Power: 1.1 KW   5.Weight: 200 KG  Longitudinal Double End Tenoner Machine    1.Working width: 100-600 mm   2.Working thickness: 4-20 mm   3.Height of working surface of table: 1100(Mainframe All Height 1100 mm)   4. Rotate speed of cutter shaft: 6000-7000 rpm   5.Feeding speed: 30-80 m/min             6.Motor Power: DTE06-12D   Station 1, 2 main spindle motor:    4X8 KW   Stations 3,4,5,6 milling spindles: 8X5.5 KW   7.Feed-in Motor:               7.5   KW   8.Cutting Tool Diameter: Φ250-Φ280XΦ40             Cutting tools such as compact sets up a hydraulic motor in need of special note. To ensure 80 meters per minute processing capacity, the proposed use of hydraulic sets up tight.   9.Dust Absorbing Inlet Diameter   Stations 1, 2 , 3 , 4 ,5,6: Φ120mmX12   Transmission chain dust absorbing: Φ100mm   10.Weight:        9000 KG   Longitudinal Brushing Machine (SGP01)   1.Width:   600 mm   2.Height: 1100 mm   3.Power:   1.1 KW 4.Weight: 100 KG    Feeding Rolling Table (central)    1.Length: 2400 mm   2.Width:600 mm   3.Speed: Can Adjust,30-80 m/min   4.Motor Power:1.1 KW   5.Weight: 200 KG   Transverse Double End Tenoner Machine(DTEH18-12D)
1.Working length: 600-1800 mm (special configuration working length:400-2500mm)   2.Working Width: 90-600 mm   3. Working thickness: 4-20 mm   4.Height of working surface of table: 950 mm (Mainframe All Height 1100 mm)   5.Rotate speed of cutter shaft: 6000-7000 rpm   6.Feeding Speed: 15-40 m/min          7.Motor Power:   Station 1, 2 ,3,4,5,6 milling spindles: 12X5.5   KW                Feed-in motor:          7.5   KW                Width adjusting motor: 1.1   KW   7.Cutting Tool Diameter:Φ220-Φ250XΦ40      Cutting tools such as compact sets up a hydraulic motor in need of special note.   8.Dust absorbing inlet diameter:        Stations 1, 2, 3, 4, 5,6:           Φ120mmX12   Transmission chain dust absorbing: Φ100mmX2   9.Weight:       9500 KG    Brushing Machine (SGP02)   1.Width:   600 mm   2.Height: 800 mm   3.Power:   1.1 KW   4.Weight: 100 KG