ACES CAS NO 7365-82-4 Biological Buffers N- Carbamoylmethyl
- Min. Order:
- 1
- Min. Order:
- 1
- Delivery Time:
- 30 Days
Your message must be between 20 to 2000 characters
Contact Now| Place of Origin: | China |
|---|
ACES CAS NO 7365-82-4 Biological Buffers N- Carbamoylmethyl taurine
Quick Detail:
| Name | ACES | Appreance |
White crystalline powder |
| Assay | 100.06% |
Ultraviolet absorbance/260nm(5%aq.) |
0.032 |
|
PH(1% aq.) |
4.01 |
Ultraviolet absorbance/280nm(5%aq.) |
0.026 |
Description :
> Formula : C4H10N2O4S
> Weight : 182.198
> Appearance: White crystalline powder
> Storage: room temperature
> HS:3402110000
> Safety Description : S26 S37/39
> Danger Description : R36/37/38
> Danger Symbol: Xi
Applications
1. ACES had been used to develop buffers for both agarose and polyacrylamide gel electrophoresis.
2. Use of ACES has been published in a protocol for the analysis of bacterial autolysins in a discontinuous SDS-PAGE system.
Notes
1. Do not let product enter drains.
Specifications
|
Assay |
100.06% |
|
Solubility(5%aq.) |
Clear, colorless solution |
|
Loss on drying,% |
0.18 |
|
PH(1% aq.) |
4.01 |
|
Ultraviolet absorbance/260nm(5%aq.) |
0.032 |
|
Ultraviolet absorbance/280nm(5%aq.) |
0.026 |
|
Shelf life |
Two years |
Synonyms:
N-(2-ACETAMIDO)-2-AMINOETHANESULFONIC ACID;N-(2-ACETAMIDO)-2-AMINOETHANESULPHONIC ACID;N-(CARBAMOYLMETHYL)TAURINE;N-(CARBAMOYLMETHYL)-2-AMINOETHANESULFONIC ACID;TIMTEC-BB SBB006711;ACES;ACES BUFFER;2-(CARBAMOYLMETHYLAMINO)ETHANESULFONIC ACID;2-[(2-Amino-2-oxoethyl)amino]ethanesulfonic acid; N-(2-ACETAMIDO)-2-AMINOETHANESULFONIC ACID; N-(2-ACETAMIDO)-2-AMINOETHANESULPHONIC ACID; N-(CARBAMOYLMETHYL)TAURINE; N-(CARBAMOYLMETHYL)-2-AMINOETHANESULFONIC ACID; TIMTEC-BB SBB006711; ACES; ACES BUFFER; 2-(CARBAMOYLMETHYLAMINO)ETHANESULFONIC ACID
Related categories:Biochemistry;Good's Buffers;Buffer;
Related Products:
The determination of solubility
Weigh a certain amount of samples into test tube, add a certain amount of water, shake and dissolve, observe the solution.
The determination of PH
Weigh a certain amount of samples into test tube, add a certain amount of water, shake and dissolve, determination of the pH used have been calibrated pH meter.v
The determination of UV absorbance
A certain amount of the sample was weighed to the nearest 0.0001g, into 10ml volumetric flask, after constant volume with pure water, at a specific wavelength by 2cm cuvette was measured by UV spectrophotometer.
Determination of melting point
Instrument:
Micro melting point apparatus WRS-2A, Melting point tubes
Determination of step:
Open switch, stable 20min.
First set the starting temperature than the melting point of the low 10 ℃, heating rate 2 ℃ / min.
The sample was grind as fine as possible and load in a clean, dry melting point pipe ,until the sample was compressed into about 1cm high .When the actual temperature reaches the set temperature and stabilized . Inserted into the capillary with the sample, the simultaneous determination of three.
The determination of Loss on drying
Weigh a sample of approximately 2g (weighing accuracy 0.0001g),Record the weight of m,The sample was placed in a Petri dish constant weight (weight recorded as m0), the tile, the thickness of not more than 5mm, into the oven (As next dish cover removed) drying at 105-110 ℃ 3 hours.When removing, make sure the dish cover,be placed in a desiccator to cool, then weighed and the weight (including surface dish) m1.
Loss on drying in accordance with the following formula:
Where:
m-- sample, g
m0-- dish, g
m1-- After drying the quality of the sample and the dish, g
