2014 newest SMD3528 60LEDS/m LED strips waterproof

Type B Waterproof Flexible LED Strip

We use full silicone tube as the outside cover, which greatly improves the heat sinking function. The strip light has long lifespan, stable quality, anti-UV, wear-resisting, energy-saving and environmental-friendly, etc. It can be used in hard environment and the background temperature can reach -25℃～45℃. Problems for glue turning yellow and hard, smelling bad and not being used in low temperature have been totally solved. With light weight and ultra-thin design, it can be installed on erose objects, which increases the flexibility of transportation and installation.

Picture:


 

Indoor and outdoor lighting
Warning
Please do not connect power supply when the light is still in box.
Please do not connect high voltage before the installation, and make sure that the fixture connects the earth.
Change the lamp at once if it is broken.
Pay attention to fire, electricity and shake.


Please kindly read the instructions before installation, and keep it well for your future reference.
Notice
1. Caustic or dissolvent chemicals may damage the light.
2. The strip is covered with silicon glue, so please do not bend and pull too much for installation, please do not use any sharp equipment during installation as it may broke the strip. 
3. The normal working temperature is -25℃-45℃, or it is bad for the lifespan. The storage temperature is -30~60℃.
4. If the light becomes broken because of misuse of other accessories which are not from our company, we are not responsible this issue.

 

Technical Data

Dimension:

Installation diagram:

1. When install U-shaped silica gel holder, please avoid electrical components so as not to damage it, also do not lock the holder too tight;
2. If mounted on curved surfaces, curved point must avoid the internal electronic components, and the bending angle should not less than 90 degree;
3. Please avoid install on sharp, rough surfaces;

Common faults and Troubleshooting
1. Please check if power supply is connected, or if the switch is in the connected position when the light do not work.
2. If the lamp to be on and off frequently, pls check whether the connection is bad or loose

Note: If the lights still can not work well after trying the methods above, pls contact professional staff to repair and do not dismantle by yourself.

Attention
1. Do not use rough objects or cleaner to wipe products, also do not use high-voltage water to wash products, because it will damage the waterproof parts of lamp shell.
2. Do not use sharp objects to scratch products, and do not bend from side, extrusion, screw it, because there will damage internal components.
3. Do not pull or break it with excessive force; otherwise, products will be damaged.
4. Please recycling the product seriously after it reach its using lifespan. You also can get some advice from the local retailer.
5. Recommend working environment temperature should be -20 degrees ~ +40 degrees. If exceed this temperature, there will have an adverse effect on the product.
6. Please don\'t use, and check regularly if it damages or there is a problem about wire insulation.

The product need professional person to install and maintain it.

Please contact the manufacturer about product for future information, such as warranty and working environment etc.
Sorry we will not make a notice if anything change on the product.

﹡Any other questions about this manual, Please consult qualified engineer.

Projects: