CE Styrofoam Foam Cutter Hot Knife

Styrofoam cutter/sponge Cutter

Still worry about how to cut foam? Ash every where?
NO, WE ARE COMING!

HTTP: //youtu. Be/TBPp8ra4MSM

With Plug for all country, both 110V/220V available



The Hot Knife is a professional-grade hot cutting tool for foamed plastics. The Hot Knife heats up in seconds and gives the operator temperature control. Never before has working with foamed plastics been this easy, inexpensive and free of mess.

The foam cutter/grooving cutter is for cutting different density foam, with fine cutting edge, no mess.
Cutting with the groover- sled, it is easy to make different groove shape on the foam.
Cut the rope. And the webbing, with fine cutting edge, no disperse. Attached with the cutting foot, the
Hot knife cut the synthetic fiber colth without backup under the cloth, seal the cutting edge as well;
Cut the seal line on the bag. Especially good for cutting sail cloth, awnings and filter cloth.

For the best results, practice on scrap pieces of foam.
When cutting foam it is best to keep the temperature and speed consistent. If smoke develops during the cut, you are cutting too slow or the blade is to hot which could result in an oversized, uneven cut. This can be remedied by lowering the temperature and intermittently releasing the trigger during your cut. As the cutting resistance increases, depress the trigger again. The Hot Knife will reach the set temperature within seconds. You can accomplish your cut with minimal smoke using this process. Cutting in this manner will also prolong the life of the knife.

Releasing the trigger approximately one or two inches prior to the completion of the cut will help keep the blade clean and free from buildup