Automatic Bottled Fruit Juice Filling Machine Plant

Automatic Bottled Fruit Juice Filling Machine Plant1)PLC control2)accurate filling precision3)CE compliantContact person: Della DingPhone number: 0086-15862620866Automatic Bottled Fruit Juice Filling Machine PlantIntroduction1. The Bottled Fruit Juice Filling Machine Plant is mainly used in the beverage and drinking water filling operations. 2. The three functions of bottle washing, filling and capping are composed in one body of the machine. 3. The whole process is automatic. 4. The machine is used to fill bottles made of polyester and plastics. 5. The machine is conveniently turned to adjust the machine to fill various types of bottles. 6. The filling operation is faster and more stable due to the micro-negative pressure filling operation of the new type is adopted. 7. The output and benefit of the machine is higher than the machines of the same specifications. 8. The advanced OMRON programmed controller(PLC) is adapted to control the machine runs automatically, air conveyor system is adopted in bottle entry section and belt conveyor system is adopted in bottle exit section, whcih can adjust speeds and coordinated with transducer of the main machine to make the operations of moving bottle forward steadily and reliably. 9. It is convenient to operate with higher automation due to every parts of the machine is inspected to run with photo electrical detector. 10. The machine is idea-preferred equipment for beverage makers. A) The Washing PartThe bottle is blew into the bottle shifting wheel, when the flushing clamp reaches the bottle neck, the jaw will clamp the bottleneck, under the guidance of the rail, the clamp will turn the bottle 180° Into an upright position, through second bottle pusher into the filling position. B) The Filling PartThe filling part is manly composed of a filling valve and filling transmission parts. The washed bottle reaches the filling position via the bottle shifting wheel. In the mean time, the bottle clamping plate of the filling machine will clamp the bottle and move up to seal the bottle, filling valve will open, send the liquid into the bottle. When the liquid level of the bottle reaches the trachea of the filling valve, the filling will stop. C)The Capping PartThe capping part consists of screw heads, capping transmission part, a sorting part and an under cover tube parts. The bottle which has finished filling will enter the capping position via the driving wheel. The photoelectric detection of the detecting signal detects the bottle, send a message to the valve cover, the cylinder cap will open, the caps will be blew into the cover plate by compressed air. The screw head which has magnetic torque will come down when it gets in a straight line with the bottle cap, the rotary cap ring gear seizes the cap and move forward, the cap lid the bottle and screw. When the torque out numbered the adjusted magnetic, the capping head will automatically slip, thus protect the cap from being damaged by the rotary cap ring gear. Bottles that have finished capping will be transported by the bottle pusher to the conveyor belt. Follow Chart: PET bottle production line: PET preform(Injection moulding machine) --Bottle blowing machineFilling line: Water treatment system— Beverage preparing system---Washing, filling, capping machine--Light checker--Sleeve labeling machine--Code sprayer--PE film Packing machine