AG-Irw003b High Strength Hot-Sell Medical Warmers

High strength hot-sell medical warmers SpecificationFunction features1. Microprocessor based servo controlled temperature system2. Air temperature, skin temperature, humidity, timer and heat power separately displayed by LED3. Alarms functions: Power failure; Over temperature; Temperature deviation; Temperature sensor failure; Fan failure; 4. Silence/reset button for alarms5. Integral timer to record therapy time6. Humidity is adjustable continuously7. >37° C temperature setting8. A keypad lock prevent inadvertent changes the setting9. Trough for pulling and pushing, which is convenient to add water and wash 10. Fan with low noise and long life-span11. Temperature deviation and over temperature could be amended in front panel directly12. A second thermal cut-off function for more safety13. Skin temperature sensor failure protect function avoid over temperature14. The infant bed inclination angle is adjustable15. Six operating windows, two sides operating windows can be swiveled16. Heater is electrically cut-out if air temperature inside incubator exceed 40° C17. Big storage cabinetStandard configurationMain body(including the transparent hood, control system, infant bed, water trough), Skin temperature sensor, I. V. Pole, mattress, height adjustable; Cabinet, castorsOptional parts: Phototherapy up side unit; Phototherapy from up and down sides; RS232(485) connector; Tray/poleTechnical data: 1. Power supply: AC 110/220V 60/50Hz2. Power input: ≤ 420VAOperating conditions: A. Environment temperature: 20° C~30° CB. Environment relative humidity: 30%~75%RHC. Environment air velocity of flow: <0.3m/s3. Air Temperature control range: 25° C~38° C4. Skin temperature control range: 32° C~38.5° C5. Skin temperature sensor accuracy: +/-0.3° C6. Temperature fluctuation: +0.5° C7. Uniformity of mattress temperature: ≤ 0.8° C8. Warm-up time: ≤ 45min9. Internal noise level: ≤ 55dB10. Humidity display range: 10%-95%RH11. Humidity accuracy: ≤ 10%RH12. Infant bed tilt angle: +10º 13. Mattress size: 67cm(L)× 54cm(W)14. Trough capacity: 1200ml15. Air filter: 0.5umTransport and storageEnvironment Temp: -10° C--+70° CEnvironment Relative Humidity: ≤ 80% RHAtmospheric Pressure: 500~1060Hpa