Expanded polystyrene insulation board
Quantity:
Your message must be between 20 to 2000 characters
Contact NowBasic Info
Basic Info
Product Description
Product Description
Basic Specification
| color | colorful |
|---|---|
| size | 900*900mm 600*600mm 600*1200mm |
| Density | 18-22kg/m3 |
| intensity of wind | >8KPa(equal to the typhoon of 16 force) |
| Non-flammability | Grade B1 |
| Type | Other |
| Panel Material | Nonmetal |
Detail Description
Expanded polystyrene insulation board
This product adopts the inorganic materials for production, using the most advanced way of thin-wall high strength reinforced concrete note pressure, through the difficult vacuum processing and thermal insulation board one-time mechanical pour model of waterproof, fire prevention, facing, heat insulation, corrosion resistance, crack one plate. Fast construction, working procedure specification, light weight and reliable, do not effect a wall structure bearing, can be equipped with a variety of facing adornment effect, break through the traditional product craze, fall off, the fire and the malpractice of the seepage, has conquered these difficult technical problems.
1. Performance index
2. Basic specification
3. Main indexes
4. Installation standard
Patterns showing
Nine outstanding traits of EPS insulation exterior wall board.
1. Environmental protection
2. Energy-saving
3. Fire prevention.
4. Lightweight and reliability
5. Ageing-resistant and good associability
6. Extraordinary waterproofing
7. Security
8. Simple construction and high performance price ratio
9. Flexible and convenient production
Using palce
EPS panels are widely used in construction, insulation, packaging, frozen, daily necessities, industrial casting etc. And also can be used to exhibition venue, cabinet, advertising signs and toys making. At present, in order to meet the national building energy efficiency requirements, the boards are mainly used in the wall exterior insulation, wall insulation, floor heating.
This product adopts the inorganic materials for production, using the most advanced way of thin-wall high strength reinforced concrete note pressure, through the difficult vacuum processing and thermal insulation board one-time mechanical pour model of waterproof, fire prevention, facing, heat insulation, corrosion resistance, crack one plate. Fast construction, working procedure specification, light weight and reliable, do not effect a wall structure bearing, can be equipped with a variety of facing adornment effect, break through the traditional product craze, fall off, the fire and the malpractice of the seepage, has conquered these difficult technical problems.
1. Performance index
| Non-flammability : | Grade B1 |
| Density | 18-22kg/m3 |
| thermal conductivity | <=0.041 /w/(m.k |
| Water absorption | <=50g/m2 |
| water permeability | there is no drop of water to emerge on the back |
| dimension error | <=0.3% |
| intensity of pulling resistance Perpendicular to the surface | >=0.2Mpa |
| Intensity of impact resistance | >=15J |
| Water vapor Permeability | <=4.5ng/(m.s.pa) |
| tensile adhesive strength | 0.21mpa |
| Anchor pullout force | 0.38KN |
| Water vapor permeation resistance | 29700m2.H.Pa/g |
| The weight per square meter | 18.3kg/m3 |
| intensity of wind resistance | >8KPa(equal to the typhoon of 16 force) |
2. Basic specification
| size: | 900*900mm 600*600mm 600*1200mm |
| The thickness of the whole panel: | 20-100mm |
| The thickness of the surface layer: | 3-5mm |
| smoothness: | +-1.5mm/m |
| form and position tolerance of four sides: | +-1.0mm |
3. Main indexes
| The weight of the finished wall panel layer: | grade B1-B2 6kg/m3-10kg/m3 |
| grade A1 10kg/m3-15kg/m3 | |
| Impermeability pressure: | In line with the requirements of JG-149-2003 |
| Freezing and thawing coefficient: | In line with the requirements of JG-149-2003 |
| The thermal insulation coefficient: | In line with the requirements of GB/T10295-2008 |
| Surface treatment: | Natural |
| paved with Inorganic pigment | |
| Electrostatic spray |
4. Installation standard
| The height difference between the two adjacent panels | +-1.5mm |
| The width of the gap between two structural panels | 12mm |
| The depth of the Mortar in the gap | >=5mm |
| Smoothness of the surface: | 5mm/4m |
Patterns showing
Nine outstanding traits of EPS insulation exterior wall board.
1. Environmental protection
2. Energy-saving
3. Fire prevention.
4. Lightweight and reliability
5. Ageing-resistant and good associability
6. Extraordinary waterproofing
7. Security
8. Simple construction and high performance price ratio
9. Flexible and convenient production
Using palce
EPS panels are widely used in construction, insulation, packaging, frozen, daily necessities, industrial casting etc. And also can be used to exhibition venue, cabinet, advertising signs and toys making. At present, in order to meet the national building energy efficiency requirements, the boards are mainly used in the wall exterior insulation, wall insulation, floor heating.
Additional Information
| Payment Terms | L/C, T/T |
|---|---|
| Minimum Order | 500PCS |
| Lead Time / Delivery Time | 20 Day(s) |
| Sample Available | YES |
| Delivery Details | 15-20 days within the receipt of deposit |
| FOB Port | ZhangJiaGang |
| Loading Info | shipping by vessels or trains according your requests |
| Packing Info | in wooden pallet or carton |
| Target Market(s) | Africa(except Middle East), Eastern Europe, Hong Kong/ Macao/ Taiwan, Japan & Korea, Latin America, Mainland China, Middle East, North America, Northern Europe, Oceania, Central & Southern Asia, Southeast Asia, Western & Southern Europe |
Related Keywords
Related Keywords
You May Also Like
You May Also Like
