Astm Carbon Seamless Steel Tube 

ASTM Carbon Seamless Steel Tube

1. Descripition of ASTM Carbon Seamless Steel Tube

the steel billets is from Baosteel, Xingcheng Special Steel or Huaisteel, we do 100% visual inspection and chemical inspection randomly, then bars were cut into short pcs as per requirement of final tube length requirement to do hot piercing, the whole processing flow chart of seamless pipe as below:

2. Specification of  ASTM Carbon Seamless Steel Tube

Tubes shall be ordered:

2.1.1. by outside diameter and inside diameter

2.1.2. by outside diameter and wall thickness

2.2 Tolerances

2.2.1. Values according to standards

2.2.2. Tolerances by agreement

2.2.3. Dimensions and tolerances according to standard ASTM A450

2.5 Surface condition

Tube surface corresponds to the standards and depends on the method of tube manufacturing and method of heat treatment. 

2.6 Tube ends

The tubes are delivered with plain ends without burrs at the ends of the tube.

Upon request ends could be plugged with plastic caps

3. Packing and Protective coating

3.1 Tubes are supplied either uncoated or with the manufacturers standard mill coating at the option of the customer (subject of agreement between customer and manufacturer).

3.2 Packaging of  ASTM Carbon Seamless Steel Tube

Tubes are packed in round or hexagonal bundles with weight max.2000 kg. Other possibilities by agreement.

Hi,this is Chrisina,thanks very much for your interest in our products,If you want such steel tubes and pipes,or the standard is not listed above,pls do not hesitate to contact me at once.pls tell me,it's my honor to service you!

Christina Skype: christina.haibinjx

Tel:+8618056100777